The 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1315 is a 0.015 inch (0.38 mm) yellow, double coated foam tape used in screen and process printing. This tape has an air release feature with high plate side adhesion used to effectively mount flexographic print plates to print cylinders.
The 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1315 provides high-quality, medium-soft combination print. The adhesive applies easily and removes cleanly from the print plate and the print cylinder for easy set-up and removal. Applications High quality halftone and combination printing E-Series adhesive allows easy plate removal Narrow web printing Combination flexographic printing Print plates Flexographic print plates Adhesion to print cylinders and sleeves Ease of Use This tape easily adheres to a print sleeve or cylinder, allowing a printing plate to be mounted in different positions. Set up is simple; just clean your print plate according to the manufacturer recommendations followed by a 50-50 mixture of isopropyl alcohol-water. Wipe the plate dry with a clean cloth. Apply the plate mounting tape using even hand pressure or use a roller to ensure uniform contact to the cylinder or sleeve. Remove the release liner and apply print plate to the tape. Use a roller to apply pressure while rolling down the plate. Be sure to carefully roll down the leading and trailing edge of the plate. Similarly, removal is clean and easy. The print plate separates cleanly from the tape and the tape removes cleanly from the print sleeve or cylinder to keep operations running smoothly. Improving the Finished Product Some competitive tapes may leave bubbles or wrinkles which compromise a critical bond between the mounting tape and print plate or between the mounting tape and the sleeve. An air bubble will cause a print defect. Don’t take the risk of compromising the quality of your finished product. Our 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1315 overcomes this problem with crosshatched grooves in the adhesive formed by the embossed release liner. Unlike flat or pebbled products, our E-series has unique micro-channels in the adhesive that allow air to escape from between the tape and the cylinder, or sleeve; and between the tape and the plate. Air bubbles disappear for virtually bubble-free mounting. This leads to faster set-up and smoother surfaces for cleaner print quality and higher productivity. Our History of Printing For decades, 3M™ products have been at work in paper mills and printing plants helping to improve the quality of finished work while improving production efficiency. From paper web splicing to plate mounting and packaging the finished job, you can rely on 3M™ for solutions and service throughout your printing operation.
Hvala vam na interesovanju za 3M. Da bismo vam pomogli da efikasno upravljamo vašim upitom i odgovorimo na njega, ljubazno vas molimo da navedete neke ključne informacije, uključujući vaše kontakt podatke. Podaci koje navedete koristiće se za odgovor na vaš zahtev putem e-pošte ili telefona od strane predstavnika kompanije 3M ili jednog od naših ovlašćenih poslovnih partnera s kojima bismo mogli deliti vaše lične podatke u skladu sa politikom privatnosti kompanije 3M.
Primili smo vašu poruku i sada obrađujemo vaš upit
Neko od naših predstavnika će stupiti sa vama u kontakt putem telefona ili e-pošte