- Two part urethane paste delivers outstanding strength and performance
- Non-sag formulation resists running and slumping of adhesive
- Primerless to most surfaces
- 10 minute open time
|
Attribute Name
|
Value
|
|---|---|
|
Adhesive Type
|
Urethane
|
|
Applications
|
Composite Bonding, Impact Resistant, Panel to Frame/Stiffner to Panel Assembly, Small Joint Assembly, Structural Bonding
|
|
Container Size (Metric)
|
48,5 Millilitre
|
|
Design Challenges
|
Impact & Shock Absorption, Noise Vibration & Harshness Control NVH
|
|
Full Cure Time
|
24 hr
|
|
Indoor/Outdoor
|
Both
|
|
Industries
|
Aerospace, Appliance, Automotive, Construction, Consumer Goods, Electronics, General Industrial, Metalworking, MRO, Signage, Specialty Vehicle, Transportation, Woodworking
|
|
Physical Form
|
Liquid
|
|
Position
|
Better
|
|
Product Form
|
Each
|
|
Product Key
|
DP6310NS
|
|
Product Type
|
Urethane Adhesive
|
|
Shear Strength
|
3600 Pound_Per_Square_Inch
|
|
Shelf Life in Months (from date of manufacture)
|
12
|
|
Storage Temperature
|
73 Degree Fahrenheit
|
|
Viscosity
|
Non-sag
|
|
Volume (Metric)
|
48,5 mL
|
|
Work Time
|
10 Minutes
|
- Two part urethane paste delivers outstanding strength and performance
- Non-sag formulation resists running and slumping of adhesive
- Primerless to most surfaces
- 10 minute open time
- Ability to bond most composites and dissimilar substrates
- Excellent water and humidity resistance, very good chemical resistance
- Cures at room temperature but can be accelerated with heat
3M™ Scotch-Weld™ Multi-Material Composite Urethane Adhesive DP6310NS is a green, non-sag, two-component urethane for bonding a variety of composites, plastics, metals and wood. This flexible adhesive has excellent elongation and stress strain properties for durable bonding of composite parts and multi-material assemblies.
When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing. Bonds to Most Composites and Dissimilar Substrates Designed specifically for multi-material and composite assemblies, our 3M™ Scotch-Weld™ Multi-Material Composite Urethane Adhesive DP6310NS delivers outstanding strength and performance. This adhesive has excellent energy absorption and fatigue properties for durable bonding of composite parts and multi-material assemblies, including plastics, metals and wood. With a 1:1 mix ratio, this green adhesive has a 10 minute open time and reaches handing strength in 45 minutes. Recommended Applications Composites and plastics to metal; medium sized parts Bonding shaped composites and plastics 3M™ Scotch-Weld™ Multi-Material Composite Urethane Adhesives DP6310NS can replace rivets and screws in attaching composites to other substrates, providing a more aesthetically-pleasing, fatigue-resistant bond line. It also bonds well to most metals without requiring priming.
Pošaljite nam poruku
Hvala vam na interesovanju za 3M. Da bismo vam pomogli da efikasno upravljamo vašim upitom i odgovorimo na njega, ljubazno vas molimo da navedete neke ključne informacije, uključujući vaše kontakt podatke. Podaci koje navedete koristiće se za odgovor na vaš zahtev putem e-pošte ili telefona od strane predstavnika kompanije 3M ili jednog od naših ovlašćenih poslovnih partnera s kojima bismo mogli deliti vaše lične podatke u skladu sa politikom privatnosti kompanije 3M.
Hvala Vam što ste kontaktirali 3M
Primili smo vašu poruku i sada obrađujemo vaš upit
Neko od naših predstavnika će stupiti sa vama u kontakt putem telefona ili e-pošte
An error occurred.
