3M™ Impact Resistant Structural Adhesive, 200 ml, 07333
- Part Number 07333
- 3M ID 7100273723
Details
Highlights
- Formulated specifically for collision absorption in OEM-specified structural bonding applications
- Two-part epoxy bonds steel and automotive aluminium, great for lightweight structures
- Can be weld-bonded or rivet-bonded immediately after application
- Affords long work times (up to 1 hour) to help ensure precise bond with fit-up
- Can be rapidly cured with heat (approx. 30 minutes)
- Silver-colored adhesive turns purple as it cures, indicating when process has begun
- Excellent extreme temperature performance
- Corrosion inhibiting formula
3M™ Impact Resistant Structural Adhesive (IRSA) is formulated for true automotive OEM-specified structural bonding applications, excellent for collision absorption in steel structures and advanced lightweight aluminum alloys. This two-part epoxy adhesive delivers extended worktimes – up to 1 hour – and can be rapidly heat-cured. The adhesive changes from silver to purple as the adhesive cures.
Engineered to withstand higher impact vs. traditional bonding adhesives, 3M™ Impact Resistant Structural Adhesive (IRSA) is excellent for OEM-specified automotive structural applications. It adheres to properly prepared automotive substrates including mild steel, high-strength steel and aluminium; vital as OEMs strive to achieve high strength in increasingly lightweight structures. This two-part epoxy adhesive is recommended for all weld-bonded and rivet-bonded joints when specified by an OEM. It provides an extended work time - up to one hour - and cures rapidly with heat (30 minutes at 80° C). Adhesive applies in a silver color and changes to purple as it cures, indicating when the curing process has begun. 3M™ IRSA is designed to absorb collision energy forces and delivers increased torsional rigidity for OEM-specified automotive structures. It allows for spot-welding (form squeeze-type) in an uncured state, typically up to three hours after application. Properly applied adhesive will seal joints completely, and perform when exposed to very hot and cold temperatures. 3M™ Impact Resistant Structural Adhesive is available in 200 ml cartridges.
Typical Properties
Resources
Related Products
| Adhesive Type | Epoxy | ||
| Application | Impact Resistance, Bonding, Attaching | ||
| Brands | 3M™ | ||
| Consistency | Paste | ||
| Container Size (Metric) | 200 mL | ||
| Container Type | Cartridge | ||
| Cure Time | 24 hr | ||
| Full Cure Time | 24 hr | ||
| Paint Time | 24 Hour | ||
| Set Time | 8 hr | ||
| Time to Handling Strength | 5 min - 10 min | ||
| Volume (Metric) | 200 mL | ||
| Work Life | 60 min |
3M™ Impact Resistant Structural Adhesive, 200 ml, 07333
3M™ Panel Bonding Adhesive, 200 ml, 08115
3M™ Manual Gun for 2 part cartridgesFor industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labelled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labelled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards, as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
