3M™ Accuspray™ Atomizing Head, 16611, 1.8 mm, 4/kit, 6 kits/case
Filler Application with 3M™ PPS™ Accuspray™ Gun
3M™ Accuspray Atomizing Head 16611 Transparent CFCU
3M™ Accuspray Atomizing Head 16611 Transparent CFOP
3M(TM) Accuspray(TM) Atomizing Head, 16611
3M™ Accuspray Atomizing Head 16611 Transparent CFIP
3M™ Accuspray Atomizing Head 16611 Transparent CBOP
3M™ Accuspray Atomizing Head 16611 Transparent CLIP
3M™ Accuspray™ Atomizing Head, Transparent
3M™ Accuspray™ Atomizing Head, Transparent
3M™ Accuspray™ Atomizing Head, Transparent
3M™ Accuspray™ Atomizing Head, Transparent
3M™ Accuspray™ Atomizing Head, Transparent
3M™ Accuspray™ Atomizing Head, Transparent
3M™ Accuspray™ Atomizing Head, Transparent
3M™ Accuspray™ Atomizing Heads are designed specifically for use with 3M™ Accuspray™ Spray Guns. This selection of replaceable heads makes for the incredibly fast, efficient application of low-, medium- and high-viscosity materials from one gun. Technicians simply remove and replace the head for the performance of a new spray gun on demand. See-through heads are easily cleaned and reused. Not compatible with 3M™ PPS™ Series 2.0 items.
Designed to provide the ideal atomization for a wide range of spray coatings, 3M™ Accuspray™ Atomizing Heads are an integral part of our 3M™ Accuspray™ Spray Gun system. These replaceable, reusable atomizing heads are incrementally sized for ideal atomization, whether you’re applying low-viscosity coatings such as waterborne, solvent basecoat paint, or higher-viscosity coatings such automotive primers or adhesives. These heads are easily cleaned and reused, or can be quickly removed and replaced for the performance of a new spray gun on demand. Further benefits include optimised primer consumption, lower application time and less time for cleanup, plus a better finish which results in less sanding time. Each replaceable atomizing head is molded from clear plastic so technicians can easily see when the head is clean to reduce cleanup times. 3 sizes of colour coded 3M™ Accuspray™ Atomizing Heads are available: 1.4 mm atomizing heads deliver fine atomization with minimal overspray, making it ideal for lower-viscosity materials such as automotive sealer, paint, topcoats, lacquers and light adhesives. 1.8 mm replaceable atomizing heads are ideal for med-viscosity to hi-viscosity coatings such as auto primers, lacquers and adhesives. 2.0 mm atomizing heads are typically used with our 3M™ Accuspray™ HGP Spray Gun, built specifically for applying high-volume, high-viscosity fluids. Use these heads for applying gel coats, adhesives, undercoatings, high build primers, specialty and sound dampening coatings. Further benefits include reduced primer consumption, lower application time and less time for cleanup, plus a better finish which results in less sanding time. Not compatible with 3M™ PPS™ Series 2.0 items.
Attribute Name
|
Value
|
---|---|
Applications
|
Coating spraying, Manual Spray Coating, Paint Application, Painting, Primer spraying
|
Case Quantity
|
6 Cartons per Case
|
Overall Diameter (Metric)
|
18 mm
|
Product Colour
|
Transparent
|
Hvala vam na interesovanju za 3M. Da bismo vam pomogli da efikasno upravljamo vašim upitom i odgovorimo na njega, ljubazno vas molimo da navedete neke ključne informacije, uključujući vaše kontakt podatke. Podaci koje navedete koristiće se za odgovor na vaš zahtev putem e-pošte ili telefona od strane predstavnika kompanije 3M ili jednog od naših ovlašćenih poslovnih partnera s kojima bismo mogli deliti vaše lične podatke u skladu sa politikom privatnosti kompanije 3M.
Primili smo vašu poruku i sada obrađujemo vaš upit
Neko od naših predstavnika će stupiti sa vama u kontakt putem telefona ili e-pošte