- Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other
- Creates a very high strength, high temperature resistant bond with up to a 4 hour bonding range
- Adhesive can be applied by spray, brush or roller
- Non-flammable in the wet state
|
Attribute Name
|
Value
|
|---|---|
|
Application Method
|
Brush, Roll, Spray
|
|
Brand
|
Fastbond™
|
|
Environmental Considerations
|
California Air Resources Board, GREENGUARD® Certified, Helps contribute to LEED® credits, Low VOC, Ozone Transport Commission, SCAQMD
|
|
Flame Retardant
|
Non-flammable
|
|
Heat Resistance
|
<230 Degree Fahrenheit
|
|
Industries
|
General Industrial
|
|
Open Time
|
30 min - 4 hr
|
|
Physical Form
|
Thin liquid
|
|
Product Colour
|
Neutral
|
|
Product Form
|
Bulk Pack
|
|
Solids Weight Percent (Approximate)
|
42.4 to 50 Percent
|
|
Substrate 1
|
Fabric, Felt, Cork & Fibrous Glass, Flexible Foam (Latex, Urethane), Glass & Ceramics, Leather, Metal, Paper & Cardboard, Plastic (ABS, PVC, Acrylic), Plastic (Flexible Vinyl), Plastic (High Performance Nylon), Plastic (Polyolefins and Thermoplastic Elastomers), Rigid Foam (Beadboard Styrene), Rigid Foam (Urethane), Rubber (Except EPDM), Wood & Hardboard
|
|
Substrate 2
|
Fabric, Felt, Cork & Fibrous Glass, Flexible Foam (Latex, Urethane), Glass & Ceramics, Leather, Metal, Paper & Cardboard, Plastic (ABS, PVC, Acrylic), Plastic (Flexible Vinyl), Plastic (High Performance Nylon), Plastic (Polyolefins and Thermoplastic Elastomers), Rigid Foam (Beadboard Styrene), Rigid Foam (Urethane), Rubber (Except EPDM), Wood & Hardboard
|
|
Surface Type
|
Wood
|
|
Units per Case
|
12
|
|
Volatile Organic Compounds (VOCs)
|
37 Grams Per Litre
|
- Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other
- Creates a very high strength, high temperature resistant bond with up to a 4 hour bonding range
- Adhesive can be applied by spray, brush or roller
- Non-flammable in the wet state
- Opening hours up to 4 hours
3M™ Fastbond™ Contact Adhesive 30NF is a water-dispersed, high-strength adhesive that has high coverage, immediate bond strength, a long bonding range and good heat resistance. Our adhesive bonds most foamed plastics, plastic laminate, wood, plywood, wood veneer, and canvas to themselves and to each other.
3M™ Fastbond™ Contact Adhesive 30NF creates a very high strength, high temperature resistant bond with up to a 4 hour bonding range. Ideal for decorative laminate applications where non-flammability and low VOCs are critical. Post-formable and heat resistant, it is non-flammable in the wet state, which may help reduce risk of fire and help keep manufacturers in compliance with insurance regulations. Not recommended for drywall laminating or for bonding metal surfaces.
Pošaljite nam poruku
Hvala vam na interesovanju za 3M. Da bismo vam pomogli da efikasno upravljamo vašim upitom i odgovorimo na njega, ljubazno vas molimo da navedete neke ključne informacije, uključujući vaše kontakt podatke. Podaci koje navedete koristiće se za odgovor na vaš zahtev putem e-pošte ili telefona od strane predstavnika kompanije 3M ili jednog od naših ovlašćenih poslovnih partnera s kojima bismo mogli deliti vaše lične podatke u skladu sa politikom privatnosti kompanije 3M.
Hvala Vam što ste kontaktirali 3M
Primili smo vašu poruku i sada obrađujemo vaš upit
Neko od naših predstavnika će stupiti sa vama u kontakt putem telefona ili e-pošte
An error occurred.
