1. Srbija
  2. All 3M Products
  3. Tapes
  4. Flexographic Plate Mounting Tapes
  5. 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H, Tan, 457 mm x 23 m, 0.05 mm

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H, Tan, 457 mm x 23 m, 0.05 mm

3M ID 70002019969Catalog Number E1120H
  • Tan flexo plate mounting tape has air release feature with high plate side adhesion
  • 0.51 mm thickness
  • Soft/Process
  • Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
 More...
View all details
Product Details

Mount your photopolymer plate to print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H. Our 0.51 mm tan, double coated foam tape has the air release feature with high plate side adhesion. It is used for high quality process printing.

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H with easy mount adhesive and higher plate side adhesive is designed for mounting flexographic print plates to cylinders or sleeves. It provides high quality tone reproduction where process printing is important. Our Easy Mount liner creates micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removability when demounting.

  • Tan flexo plate mounting tape has air release feature with high plate side adhesion
  • 0.51 mm thickness
  • Soft/Process
  • Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
  • Easy Mount liner, has micro-channels in both adhesive surfaces. The crosshatched pattern allows air to escape from between the tape and cylinder/sleeve and between the tape and plate. The productivity is increased, total handling time is reduced and printing defects are eliminated
Specifications
Attribute Name
Value
Adhesive Type
Differential Acrylate
Air Release
Yes
Applications
Flexographic Plate Mounting
Backing Material
Polyethylene Foam
Backing Thickness (metric)
0,559 Millimetre
Composite Sleeves
No
Industries
Print
Overall Length (Metric)
22,86 m
Overall Width (Metric)
457 mm
Primary Liner
Polycoated Polyester
Print Quality
Process Printing
Print Quality (Series)
11 Series
Product Colour
Tan
Product Form
Roll
Total Tape Thickness without Liner (metric)
0,56 Millimetre
Urethane Sleeves
Yes
Contact Us

Pošaljite nam poruku

Hvala vam na interesovanju za 3M. Da bismo vam pomogli da efikasno upravljamo vašim upitom i odgovorimo na njega, ljubazno vas molimo da navedete neke ključne informacije, uključujući vaše kontakt podatke. Podaci koje navedete koristiće se za odgovor na vaš zahtev putem e-pošte ili telefona od strane predstavnika kompanije 3M ili jednog od naših ovlašćenih poslovnih partnera s kojima bismo mogli deliti vaše lične podatke u skladu sa politikom privatnosti kompanije 3M.

  •  
  •  
  •  
  •  
  •  
  • 3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers. Please be aware that this information may be stored on a server located in the U.S. If you do not consent to this use of your personal information, please do not use this system.

  • Slanje poruke

Hvala Vam što ste kontaktirali 3M

Primili smo vašu poruku i sada obrađujemo vaš upit
Neko od naših predstavnika će stupiti sa vama u kontakt putem telefona ili e-pošte

An error occurred.