Scotch® Flatback Masking Tape 250, Tan, 25 mm x 55 m, 0.15 mm

• Clean removal from paint, plating and powder coatings
• Aggressive, pressure sensitive adhesive provides instant adhesion
• Special flatback paper backing resists tearing and breakage
• Controlled unwind and easy to position, manipulate and tear by hand
• Sealing, holding, bundling, reinforcing, identifying, tabbing, wrapping, paint masking, splicing and protecting.

Scotch® Flatback Masking Tape 250 is used as a quality control paint adhesion testing tape. It features high peel adhesion and a strong flatback paper backing. It is ideal for bundling and wrapping applications.

Strong Attachment, Clean Removal Scotch® Flatback Masking Tape 250 features a rubber adhesive that instantly adheres to a wide variety of surfaces. It detaches easily and provides clean removal, making it ideal for painting adhesion testing applications. Special flatback paper backing has good tensile strength to resist breakage. It also provides a controlled unwind while remaining easy to tear and manipulate during the application process. Used most often as a paint adhesion testing tape, Flatback Masking Tape 250 also works well for general holding and bundling applications where a stronger paper backing is needed. Ideal for use in temperatures up to 125°F/52°C up to 30 minutes of time. Recommended Applications Quality control paint adhesion testing applications General holding and bundling applications Certified Testing Our Scotch® Flatback Masking Tape 250 is designed with the user in mind. The interior of the roll features a manufacture date to ensure that you always know the shelf-life of this product. To obtain best performance use Scotch® Flatback Masking Tape 250 within 18 months from date of manufacture. Because of its unique properties Scotch® Flatback Masking Tape 250 can be certified to meet ASTM D 6123 / D 6123M-97. Scotch® Flatback Masking Tape 250 has been used to conduct testing according to ASTM D-3359; however this test method does not endorse or suggest that any particular tape must be used. Designed and manufactured for a minimum of 60 oz/inch adhesion to steel by ASTM D-3330 Method A.