• 3M™ Novec™ 1700 Electronic Grade Coating 5,44 kg /3,8 L Container
  • 3M™ Novec™ 1700 Electronic Grade Coating 5,44 kg /3,8 L Container

    3M ID 98021229947
    • Zero ozone depletion potential
    • Low global warming potential (GWP)
    • Is not a volatile organic compound (VOC)
    • Is listed as a Clean Air Solvent by California’s South Coast Air Quality Management District (SCAQMD)
     More...
    Detalji o proizvodima

    3M™ Novec™ 8200 Engineered Fluid is a clear, colorless, low-odor fluid intended to replace 1,1,1-trichloroethane and perchloroethylene in film cleaning applications.

    3M(TM) Novec(TM) 1700 Electronic Grade Coating is designed for moisture and corrosion protection of printed circuit boards and electroni c components. It is a clear, low viscosity, low surface tension solution of a 2 wt% fluorochemical acrylic polymer carried in a hydrofluoroether solvent. The coating dries to a thin, transparent, film with excellent hydrophobic and oleophobic properties. It repels oils, water, silicones and photoresist solutions. The coating is easy to apply (dip, spray or syringe dispensing), air-dries in seconds, requires little or no masking and is removable and repairable.

    • Zero ozone depletion potential
    • Low global warming potential (GWP)
    • Is not a volatile organic compound (VOC)
    • Is listed as a Clean Air Solvent by California’s South Coast Air Quality Management District (SCAQMD)
    • Is thermally and electrically stable with excellent dielectric properties
    • Provides excellent repellency, anti-wetting and anti-sticking properties against liquids, water, hydrocarbons, silicones, and photoresists

    Predložene Aplikacije

    • Electronic Coatings
    • Anti-Stiction
    • Chemical Protection
    • Corrosion Protection
    • Moisture Protection
    Specifikacije
    Aplikacija
    Anti-Stiction, Chemical Protection, Zaštita od korozije, Moisture Protection
    Coating Location
    Electronic Device Components
    Coating Thickness (Dip Coated)
    0.1 - 0.2 µm (depending on application method)
    Čuvati na temperaturi (u Farenhajtima)
    60 °F - 80 °F (16 °C - 27 °C)
    Dielectric Constant
    3.2 (@1kHz, 30%RH)
    Dielectric Strength (V/mil)
    2000 V/mil
    Dissipation Factor
    0.002 (@1kHz, 30% RH)
    Dostupne veličine pakovanja
    12 lb (5.4 kg) 1 Gal Container
    Kategorija aplikacije
    Electronic Coatings
    Komentari RoHS EU Direktive
    Yes (including Directive (EU) 2015/863)
    Metod aplikacije
    Solution applied by dip, brush, spray or syringe dispense
    Neto težina
    5,4 kg
    Oblast pokrivenosti
    Depends on the application
    Oblik proizvoda
    Tečnost
    Polymer Type
    Fluoroacrylate
    Removability
    Removable with 3M™ Novec™ Engineered Fluid 72DA, 3M™ Novec™ Engineered Fluid 73DE or 3M™ Novec™ Engineered Fluid 7100
    Serije prozvoda
    Novec 1700
    Solids Level
    2 %
    Thermal Cure Time and Temperature
    No need to cure, dries at room temperature
    Usaglašeno sa Direktivom RoHS 2011/65/EU
    Da
    UV Detectable
    Ne
    Vreme sušenja
    <2 Minutes
    Vrsta proizvoda
    Protecting
    Pratite nas
    Brendovi navedeni u gornjoj listi predstavljaju robne marke kompanije 3M
    Promenite jezik
    Република Србија - Српски