3M™ Glass Bubbles K25, 40 kg

3M Broj Proizvoda K253M ID FS910004142
  • Lower viscosity, improved flow
  • Increased filler loading, reduced cost
  • VOC reduction
  • Chemical stability and inertness
 More...
Detalji o proizvodima

3M™ Glass Bubbles K25 have a density of 0.25 g/cc and an isostatic crush strength of 750 psi.

Low density (0.25 g/cc) and high isostatic strength make 3M glass bubbles K25 ideal additives for shallow water buoyancy applications or processing applications where high strength is needed. In addition, like all 3M glass bubbles, K25 bubbles are compatible with thermoset resins like polyurethane and epoxy, and are virtually insoluble in water.

  • Lower viscosity, improved flow
  • Increased filler loading, reduced cost
  • VOC reduction
  • Chemical stability and inertness
  • Reduced dielectric constant
Specifikacije
Boja materijala proizvoda (vidljiva golim okom)
White, powdery
Density Range (g/cc)
0.20 - 0.29
Gustina (g/cc)
0,25
Hemijski sastav
Soda-lime-borosilicate glass
Industrije
Insulation and Buoyancy, Rudarstvo, Paints and Coatings, Rubber and Plastic, Transport
Mogućnosti
Chemical Resistance, Lightweighting, Temperature Resistance
Oblik
Hollow spheres with thin walls
Particle Size Range (D50 Micron)
50 - 59, 50 - 59
Strength (MPa)
5.1
Veličina čestice (D50 micron)
55
Pratite nas
Brendovi navedeni u gornjoj listi predstavljaju robne marke kompanije 3M
Promenite jezik
Република Србија - Српски